Sony STR-DA5500ES - Manual (Page 146)

146 GB
System settings
Customizes the settings of the receiver.
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
x OFF
The screen saver function is disabled.
x ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
Selects the control mode for maintenance and
service.
x OFF
x RS232C
x Network
Selects the language for the messages on the
screen.
x English
x Español
x Français
x Deutsch
You can check the version of the firmware on
the system of the receiver, and you can also
update the firmware of the receiver.
You can also update the firmware of the
receiver using the ES Utility application
software provided on the CD-ROM supplied
with the receiver. For details, see “Updating
the receiver firmware using the ES Utility”
(page 103).
To check the system
information
1
Press V/v repeatedly to select “System
Update,” then press .
2 Press V/v repeatedly to select “Internet
Update,” then press .
The system information of the receiver
appears on the TV screen.
3 Press B/b to select “Cancel,” then
press .
To update the receiver using the
menu
1 Press V/v repeatedly to select “System
Update,” then press .
2 Press V/v repeatedly to select “Internet
Update,” then press .
The current system version and latest
system version are displayed on the TV
screen.
3
Press to select “Update.”
A confirmation screen appears on the TV
screen.
4 Press V/v repeatedly to select “Start,”
then press .
Receiver updating starts.
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
updating.
When the updating complete, the receiver
will restart automatically.
Screen Saver
Installer Mode
Language
System Update