Sony KDE-55XBR950 - Manual (Page 66)

64
Features
Watching TV
z For a complete list of all
the functions of the
remote control, see page
56. To Do This ... Do This ...
Activate the remote control to
operate the TV Press FUNCTION repeatedly until the TV
indicator lights up.
Turn on/off the TV Press POWER
Tune directly to a channel To tune to analog channels, press 0-9 and then
ENTER (or wait 3 seconds).
For digital subchannels, press 0-9 , , press
0-9 again, and then ENTER .
For example, to select subchannel 2.1, press 2 ,
, 1 , and then press ENTER .
You can also select digital channels
using the digital program guide.
See page 73 for details.
Adjust the volume Press VOL +/–
Mute the volume Press MUTING (press again to unmute)
Alternate back and forth between
two channels Press JUMP
The TV alternates between the current channel
and the last channel tuned.
Display the current channel
number (and other information) Press DISPLAY once to display the channel
number, current time, wide mode, and channel
label (if set). Press
DISPLAY again to turn
Display off.
Switch the TV’s input to the VCR,
DVD player, or other connected
equipment Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the TV’s
video inputs.
Change video and audio options,
customize the TV’s setup, set
parental controls, and more Press MENU to display the Menu. For details,
see “Using the Menus” on page 99.
Switch the TV’s input between
sources connected to the TV’s
VHF/UHF and CABLE inputs Press ANT to alternate between sources
connected to the TV’s VHF/UHF and CABLE
inputs.
Switch the TV’s input to a
connected i.LINK device Press i.LINK to display a list of a available
i.LINK devices, and select the desired device
from the list. See page 94 for details.