Sony DCR-TRV830 - Manual (Page 83)

83
Customizing Your Camcorder
Changing the menu settings
Icon/item
STILL SET
PIC MODE
QUALITY
IMAGESIZE
MOVIE SET
IMAGESIZE
REMAIN
PRINT MARK
PROTECT
Mode
z SINGLE
CONTINUOUS
MULTI SCRN
z SUPER FINE
FINE
STANDARD
z 1152
Ч
864
640
Ч
480
z 320
Ч
240
160
Ч
112
z AUTO
ON
ON
z OFF
ON
z OFF
Meaning
Not to record continuously
To record continuously (p. 98)
To record 9 images continuously (p. 98)
To record still images in the finest image
quality mode
To record still images in the fine image quality
mode
To record still images in the standard image
quality mode (p. 91)
To record still images in 1152
×
864 size
To record still images in 640
×
480 size
To record moving pictures in 320
×
240 size (p. 93)
To record moving pictures in 160
×
112 size
To display the remaining capacity of the
“Memory Stick” in the following cases:
• For 5 seconds after setting the POWER switch
to MEMORY
• For 5 seconds after inserting a “Memory
Stick” into your camcorder in MEMORY or
VCR mode
• When the capacity of the “Memory Stick” is
less than 1 minute in MEMORY mode
• For 5 seconds after completing a moving
picture recording
To always display the remaining capacity of the
“Memory Stick”
To write a print mark on still the recorded still
images you want to print out later (p. 136)
To cancel print marks on still images
To protect selected images against accidental
erasure (p. 132)
Not to protect images
POWER
switch
MEMORY
VCR
MEMORY
MEMORY
VCR
MEMORY
VCR
MEMORY
VCR
MEMORY
Note on IMAGESIZE
If you set PIC MODE to MULTI SCRN, IMAGESIZE is automatically set to 640
×
480.
VCR
MEMORY