Burst settings – Sony DSC-WX9 User Manual
Page 69
Top page > Shooting > Using shooting functions > Burst Settings
Burst Settings
You can select Single (single-image) or Burst as the shooting mode.
1.
Press
(Burst Settings) on the control wheel.
2.
Select the desired mode with the control wheel.
(Single)
The camera shoots a single image.
(Burst)
The camera shoots up to 10 continuous frames in one burst when you hold
down the shutter button.
Notes
[Flash] is set to [Off].
When recording with the self-timer, a series of up to 10 images is recorded.
[Focus], [White Balance], and [EV ] are adjusted for the first image, and these settings are
also used for the other images.
When the battery level is low, or when the internal memory or a memory card is full, the
burst stops.
[VGA] image size will be set while recording on internal memory.
You may not be able to set some functions or MENU items depending on the selected REC
mode. For details, see “Functions not available in some REC modes”
and “MENU
items not available in some REC modes.”
Related Topic
Copyright 2011 Sony Corporation
69