AT&T 8110 - Manual (Page 40)

Appendix D
FCC Registration and Repair Information
If Your Telephone Does Not Respond
If your 8102 or 8110 telephone does not respond to any button presses
or if it sounds as if it is dead, try the following procedure before seeking
repair assistance.
1
2
3
Pick up the handset
Press the PROGRAM button
Hang up the headset
If this procedure does not solve the problem, follow your usual
instructions for repair of a telephone. Your System Administrator will be
able to help you.
36
Your new AT&T 8102 or 8110 telephone has been registered with the
Federal Communications Commission (FCC). This product complies
with standards in Part 68 of the FCC rules. The FCC requires us to
provide you with the following information:
●
●
●
CONNECTION AND USE WITH THE NATIONWIDE TELEPHONE
NETWORK
The FCC requires that you connect your telephone equipment to the
nationwide telephone network through a modular telephone outlet or
jack. The modular telephone outlet or jack to which the telephone
must be connected is a USOC RJ11C or RJ11W.
The telephone may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state
tariffs. (Contact your state public utility commission or corporation
commission for information.)
INFORMATION FOR THE TELEPHONE COMPANY
Upon request of your local telephone company, you are required to
provide them with the following information:
A . Your phone number.
B . The telephone equipment's FCC registration number and ringer
equivalence number (REN). These numbers are on the back or
bottom of your telephone equipment.
The REN is useful to determine how many devices you may connect
to your telephone line and still have them ring when your telephone
line is called. At most, but not all areas, the sum of all REN's should
be 5 or less. You may want to contact your local telephone
company.
REPAIR INSTRUCTIONS
If it is determined that your telephone is malfunctioning, the FCC
requires that it not be used and that it be unplugged from the modular
outlet until the problem is corrected. Repairs can only be made by
the manufacturer or its authorized agents or by others who may be
authorized by the FCC. For repair procedures, follow the instructions
outlined under the AT&T Warranty Information section.
37