Panasonic MC-CL935 - Manual (Page 18)

- 18 -
➢ Pull cord out of canister to desired
length. The cord will not rewind until
the cord rewind button is pushed.
➢ Plug the polarized power cord into a
120 Volt outlet located near the floor.
To rewind:
➢ Unplug the vacuum cleaner.
➢ Hold the plug while rewinding to pre-
vent damage or injury from the mov-
ing cord.
➢ Push cord rewind button.
➢ The wand length is adjustable and
requires no assembly.
➢ To adjust, simply push down on the
wand adjust button and slide the
upper wand to the desired height.
➢ When adjusting the wand length you
may have to hold the POWER NOZZLE
with your hand or foot.
Telescopic Wand Adjustments
Keep Hand
Above This Tab
Garder la main
au dessus de
cet onglet
Manténgase la
mano arriba
esta lengüeta
Wand Length
Adjust Button
Bouton d'ajustement
de longueur du tube
Control de extensión
adjustable del tubo
On-Off Switch
OFF
OFF
FLOOR
CARPET
OFF
➢ Select a switch position on handle.
➢ OFF
➢ FLOOR - turns on canister motor
only. Headlight is off.
➢ CARPET - turns on both canister
and Power Nozzle motors.
Headlight is on.