IPricot IPR-S1000 - Manual (Page 66)

Configuring the IPR-S1000
61
In the drop-down menu, select active to start VPN.
In the blank field, enter the IP address or the FQDN, i.e. the PPTP server.
In the blank field, enter the authname.
In the blank field, enter the password.
In the drop-down menu, select the debug level.
To obtain the signification of all the options as well as the default values, click
on the help button.
In the blank field, enter the time between the keep-alive frames.
In the drop-down menu, select active to hangup the PPTP connection when the
PPP connections comes up.
In the blank field, enter a number (in seconds) corresponding to the timeout of
the first connection. It is recommended to set up a value just greater than the
time to set up the PPP link.