Woodhead EB Balancer Series - Manual (Page 4)

©Aero-Motive Sep-99 Page 4 of 5 SM113201B
NOTE: Cable must be fully wound onto drum before attaching rear case.
D. Parts Replacement
All parts shown on parts list are replaceable in the field without special tools.
NOTE: When ordering replacement parts, always include the balancer model number and serial number.
Always insist upon genuine Aero-Motive replacement parts.
E. Maintenance Inspection
The balancer is designed to require little maintenance. Periodically check cable (40), tool clip (40), and
shackle (25-29 or 44) for wear. Replace all worn parts immediately. The balancer is lubricated at the
factory; no additional lubrication is required.
IV. Replacement Parts