Minka Group F565-WH - Manual (Page 8)

Each set of blade holder has gone throuhh stringent
factory testing and is weighed and matched to within
one gram. In addition to size and weigh, grain color,
and texture, and lacquer consistency have aslo been
checked to insure long life in both performance and
beauty.
1. LAYOUT THE BLADES AND BLADE
IRONS, and locate the proper screws for attaching
thr blades to the blade irons.
2. ATTACH BLADE IRONS TO THE BLADES
by using screw (A) through the top of the blade and
into the blade iron. Thread screw (B) through the
bottom of the blade iron.
3. ATTACH THE BLADE ASSEMBLY TO THE
FAN by tightening screw (B) to the fan motor.
4. ATTACH THE SWITCH CUP if not already
attached by connecting the electrical connectors,
sliding the cup into place and securing it with the
provided screws.
YOUR INSTALLATION IS COMPLETE.
1
2
3
A B
F
LUSH
M
OUNT
F
AN
B
LADE
I
NSTALLATION