Golight HELIOS Thermal Imaging Camera - Manual (Page 17)

14
Dimensions and Weight
Dimensions (6 .75” x 7 .25” x 8”)
Weight: 4 Lbs .
Mounting Points: Three Screws
Warnings and Cautions
Caution! This guide uses the term Caution to indicate a potentially hazardous
situation, which, if not avoided, may result in injury, damage to the vehicle,
Helios or other property damage .
Do not operate any function that takes your attention away from safely driving
your vehicle .
Any function that requires your prolonged attention should only be performed
after coming to a complete stop . Always stop the vehicle in a safe location
before performing these functions . Failure to do so may result in an accident .
Consult your local and state driving regulations prior to installation .
In many states, using active monitors in view of the driver is prohibited .
Consult your local and state driving regulations for laws and guidelines . User
assumes all risks and indemnifies the manufacturer from any liability that may
arise from the use of this product .
Minimize display viewing while driving .
Viewing the display may distract the driver from looking ahead and may
result in an accident . The Helios thermal imaging system should not be used
as a substitution for head lamps or head lamp assisted human vision during
vehicle operation .
Use this product for 12 VDC applications only .
Use for other applications may result in excess heat, fire, equipment malfunc-
tion and may void the limited warranty .
No Export
Notice: All thermal imaging systems are subject to export control . Standard
NTSC (30Hz) and PAL (25Hz) units are subject to export restrictions and
licensing by the United States Government . Models with video frame rates at
or below 9Hz do not require licensing but do require compliance with other
export laws . Please contact Golight Inc’s export Dept . for further information .