Muxlab S-VideoAudio GLI Balun - Manual

8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
© MuxLab Inc. 2010 94-000665-A SE-000665-A
Specifications
Environment S-Video equipment
Devices DVD players, satellite receivers, laptops, notebooks, monitors, LCD
projectors, CCD cameras, video switchers, S-Video splitters, S-Video
converters and other S-Video equipment
Transmission Transparent to the user
S-Video Audio
Bandwidth 20 Hz to 6 MHz 20 Hz to 20 kHz
Impedance 75 ohms Source 100 Ω Max, Receiver 10 kΩ min.
Max. Input 1.1 Vp-p 1.1 Vp-p
Insertion Loss Less than 2 dB per pair dB
over the frequency range Less than 2 dB per pair
Return Loss Better than 15 dB over the
frequency range N/A
Common Mode
Rejection Ratio Greater than 40 dB over the
frequency range 60 dB @ 1 kHz min.
THD N/A Less then 0.007% @ 1 kHz
Max. Distance:
Cat 5e/6 UTP/STP 1,000 ft (305 m) 3250 ft (1 km)
Pin Configuration
(RJ45)
Reverse Polarity
Sensitive Luma: Pins 7(R) & 8(T)
Chroma: Pins 4(R) & 5(T)
Audio 1: Pins 1(R) & 2(T)
Audio 2: Pins 3(R) & 6(T)
Cable:
Cat 5e/6 UTP/STP 24 AWG or lower solid copper twisted pair wire
Impedance: 100 ohms at 1 MHz
Maximum capacitance: 20 pf/ft
Attenuation: 6.6 dB/1,000 ft at 1 MHz
Ground Loop
Isolation In the range of +/-50VDC
Connectors One (1) 4-pin Mini DIN, two (2) RCA audio jacks and one (1) RJ45
The 500018 comes with one (1) 6” dual-RCA stereo audio cable
Temperature Operating: 0° to 55°C
Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Fire retardant plastic; black
Dimensions 2.40” x 2.25” x 1.00” plus 6” Max. S-Video lead
Weight 3.6 oz (103 g)
Warranty Lifetime
Order Information 500018 S-Video/Audio GLI Balun
S-Video/Audio Balun GLI – 500018
Quick Installation Guide
Overview
The S-Video/ Audio GLI Balun allows one (1) S-Video channel and one (1) stereo line level analog
audio channel to be transmitted via unshielded twisted pair (UTP) cable in a point-to-point
connection for more versatile cabling. The S-Video/Audio GLI Balun offers full ground loop
isolation to help to eliminate hum-bars or other distortions related to ground loop. The balun is
used in conjunction with other standard MuxLab S-Video products such as the 500016, 500017,
500038 and 500200 in order to provide ground loop isolation for the system.
Applications
The S-Video/Audio GLI Balun is applied where ground loop issues may be present. Some
applications include home theatre systems, boardroom projector systems, classroom training and
rental & staging.
Caution: Do not attempt to open the housing. There are no user-serviceable parts inside the
S-Video/Audio GLI Balun. Opening the unit may void your warranty.
Note: In order to support the full 20Hz to 20KHz audio bandwidth, the baluns at both ends must
support 20Hz to 20KHz bandwidth. Please verify the balun’s specification table. Furthermore,
only amplified speakers may be connected directly to the S-Video/Audio GLI Balun. Do not
connect 4 ~ 8 ohm speakers directly to the balun.