Muxlab HDMI 4K Fiber Extender Kit - Manual

© MuxLab Inc. 94-000708-A SE-000708-A
8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: [email protected] URL: www.muxlab.com
Specifications
Environment HDMI 1.3a
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting
HDMI.
Transmission Transparent to the user
Bandwidth 340 MHz
Signals HDMI 1.3a protocol
Connectors One (1) HDMI receptacle.
One (1) SC Fiber connector.
3.5mm jacks for IR emitter and sensor
DB9 Connectors for RS-232 Ports
Note: Fiber and serial cables not included.
Maximum Distance
Based on a maximum
length of 6.6 ft (2 m) of
HDMI cable per end.
1080P video may be extended up to 1000 feet (305m), depending of the
type of fiber used.
100m (300 ft) on 62.5/125 µm (OM1) multi-mode SC fiber
305m (1000 ft) on 50/125 µm (OM3) multi-mode SC fiber.
Cable One (1) Multimode fiber 50/125 µm or 62.5/125 µm cable required
Power Supply Two (2) 110-240V/5VDC power supplies with interchangeable blades
Power Consumption Transmitter: 2.7 Watt Receiver: 2.3 Watt
Temperature Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Enclosure Steel
Dimensions 4.00” x 3.00” x 0.876” (10.2 x 7.6 x 2.2 cm)
Weight 2.0 lb (0.9 kg)
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty 2 years
Order Information 500460 HDMI Fiber Extender Kit
HDMI Fiber Extender Kit
500460
Quick Installation Guide
Overview
The HDMI Fiber Extender Kit (500460) allows HDMI equipment to be connected up to
1000 ft (305 m) @ 1080p Deep Color via one (1) 50/125 µm
Multimode fiber cables in a
point-to-point configuration. The kit comes with one (1) Transmitter and one (1)
Receiver as well as an IR Emitter (500998) and IR Sensor (500999) for remote control
applications.
Applications
Applications include commercial and residential AV systems, classroom projector
systems, digital signage, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1. Identify the connectors on the Transmitter and Receiver as indicated on the
product labels.