BrandTech Scientific EASYCAL 4.0 - Manual (Page 18)

18 EASYCAL ™ User Guide Version 4.0 · Status: June 2008
EASYCAL
™
User Guide
4.7 Graph
The “Curve” button allows you to view a graph of the various
calibration results of an instrument.
For example, if an instrument was tested five times, you will
get a graph of V
mean
of the nominal volume, based on these
five calibrations.
You can print the graph by clicking on the “Print” button.
4.5 Archiving
The “Archive” function allows you to save selected records,
or the entire test history, in a single file.
☞ If you wish to archive only part of the test history, use
the filter to determine which records are to be saved in
the file.
☞ Choose the drive, folder and file name for the archive
file.
4.6 Details of measuring results
To view details, choose the “Details” function to open the “Measuring Results” screen. Use the navigation but-
tons to view other records.
Navigation buttons:
= First record
= Previous record
= Next record
= Last record
After locating the record for which you would like to view the
data analysis again, click on “Tolerance limits” to proceed
to the next screen.
The “Tolerance limits” screen shows the error limits that
were applied to the test. All entry fields are locked to prevent
any subsequent alteration of data, with the exception of the
“Note” field.
Click “Back” to leave the “Tolerance Limits” screen and to
return to the “Measuring Results” screen.
Click “Data analysis” to move to the data analysis screen.
Click “Print test report” to print the complete test record
for the selected record again.