HES 2005M3 SMART Pac III - Manual

Power Input
Power Output
Slide Switch
LED Status
Indicator
2005M3 SMART Pac III™
Installation Instructions HES, Inc.
22630 N. 17th Ave.
Phoenix, AZ 85027
800-626-7590
www.hesinnovations.com
Overview
The SMART Pac III is an in-line power controller designed to protect and
extend the life of HES electric strikes and other ASSA ABLOY electrified prod-
ucts. The built-in poly switch and zener diode protect the host system from
possible reverse current surges, while a reduced voltage ‘step down’ extends
the life of the electric strike by reducing operating temperature. The SMART
Pac III can provide a DC output with an input ranging from 10.5 to 33 VDC or
10.5 to 30 RMS AC.
The SMART Pac III can also be used to troubleshoot installation problems. The
SMART Pac III’s built-in LED can be used as a simplified voltage meter that
indicates the power supply voltage at the installation. In addition, the SMART
Pac III has a two-position Slide Switch that matches the SMART Pac III output
voltage to the operating voltage of the electric strike. Note: The input voltage
must be in range of the voltage required by the electric strike.