Kramer Electronics VP-88K - Manual (Page 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing in a Rack
8
4.1 Using the IR Transmitter
You can use the RC-IR3 IR transmitter to control the machine via the built in IR
receiver on the front panel or via an external IR receiver
11F
1 . The external IR receiver
can be located 15m (49ft) away from the machine. This distance can be extended
to up to 60 m (197ft) when used with three extension cables
12 F
2 . Connect the external
IR receiver to the REMOTE IR 3.5mm connector.
5 Installing in a Rack
This section provides instructions for rack mounting the unit.
1 Kramer P/N: C-A35M/IRR-50
2 Kramer P/N: C-A35M/A35F-50