Kramer Electronics VS-44HN - Manual (Page 13)

10 VS-44HN - Connecting the VS-44HN 4x4 HDMI Matrix Switcher
To connect the VS-44HN 4x4 HDMI Matrix Switcher as illustrated in the
example in Figure 3 :
1. Connect up to four HDMI sources (for example, DVD players) to the IN
HDMI connectors.
You do not have to connect all the sources.
2. Connect the four OUT HDMI connectors to up to four HDMI acceptors (for
example, LCD displays with built-in speakers).
You do not have to connect all the outputs.
3. If required, connect a PC/controller to the RS-232 port (see Section
6.4
)
and/or the Ethernet port (see Section 7.2 ).
4. Connect the device to the mains electricity (not shown in Figure 3 ).
5. Power on the device.
6. If necessary, acquire the EDID (see Section 6.1 ).