Kramer Electronics VS-88FO - Manual (Page 13)

10 VS-88FO - Connecting the VS-88FO
5. Connect the OUT connectors to up to eight fiber optic acceptors (for
example, a Kramer 690R receiver connected to 3G HD-SDI displays).
6. Set the Machine # and termination DIP-switches (see Section
5.2.1
).
7. Optionally, connect:
 A genlock source to the GENLOCK BNC connector
 The LOOP BNC connector to the GENLOCK connector of the next unit
in the line, and release the TERM button for looping
Push in to terminate the input. Release when the input extends to another unit.
8. Connect a PC and/or controller (if required), to the RS-232 port (see
Section
5.3
), and/or the RS-485 port (see Section
5.3
), and/or the Ethernet
connector (see Section
5.5
).
9. Connect the power cord.
We recommend that you use only the power cord that is supplied with this machine.
Figure 3: Connecting the VS-88FO