Kramer Electronics SL-1 - Manual (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the SL-1 Master Room Controller
8
6 Operating the SL-1 Master Room Controller
You can operate your SL-1 using:
• A K-Net compatible remote controller or auxiliary control panel:
To operate your device using an external K-Net device, see the
K-Config Configuration Guide
1
• The optional RC-4 Infrared remote control transmitter:
To operate your device using the infrared remote controller, see the
User Manual packed with the remote controller
• A PC running Site-CTRL control software:
To operate your device using Site-CTRL, see the Site-CTRL and
Web Access Online User Guide
1
7 Technical Specifications
The SL-1 technical specifications are shown in Table 2 :
Table 2: SL-1 Master Room Controller Technical Specifications
2
INPUTS: 2 RS-232 and K-NET on terminal block connectors; Ethernet on an RJ-45
connector; 1 infrared sensor, 1 infrared on a 3.5mm mini jack connector; 1
USB for programming
OUTPUTS: 2 infrared and 3 relays (36V AC or DC, 2A, 60VAC maximum on non-
inductive load) on terminal block connectors
DEFAULT IP SETTINGS: IP number: 192.168.1.39; Mask: 255.255.0.0; Gateway: 0.0.0.0
INDICATORS: LED indicator for each function
POWER SOURCE: 12V DC, 2A (from power supply) or 12V DC over K-NET connection
DIMENSIONS 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H
WEIGHT: 0.3kg (0.7lbs)
ACCESSORIES: Power supply
OPTIONS: RK-3T 19” rack mount, RC-4 remote controller, external IR receiver
3
and IR
receiver extension cables
4
1 Available for download at the Kramer Web site: www.kramerelectronics.com
2 Specifications are subject to change without notice
3 Model: C-A35M/IRR-50
4 Model: C-A35M/A35F-50