Kramer Electronics SV-307 - Manual (Page 8)

Defining the Wall Plates (U.S. Versions)
5
4.2 SV-301xl (U.S.)
The SV-301xl is a single-gang wall plate insert and has an RJ-45 connector at the
rear and a power connector on the side. EDID information can be stored in the wall
plate by using the FC-200 XGA EDID Copier Kramer Tool (see the FC-200 XGA
EDID Copier User Manual). Table 2 defines the front and rear views of the
SV-301xl.
Table 2: SV-301xl (U.S.) Front and Rear View
SV-301xl Front View SV-301xl Rear View
# Feature Function
1 ON LED Lights red when receiving power (when no signal is
detected); lights green when receiving a signal
2 COMPUTER IN 15-pin HD Connector Connect to the computer graphics source
3 AUDIO IN 3.5mm Mini Connector Connect to the audio source
4 RJ-45 Connector Connect to the SV-551/SV-552 Processor/Controller
5 DC IN Power Connector Connect to an optional 12V power supply
Figure 1 defines the SV-301xl as an example, in its plastic frame.
Figure 1: Wall Plate (U.S.) Enclosed in its Plastic Frame
3F
1
1 Each model that is designed specifically for the U.S. market can be mounted inside a plastic frame