Kramer Electronics PT-571 - Manual

C-DGKat623 Termination
Introduction
Thank you for purchasing Kramer’s BC-DGKat623 Twisted Pair cable and its Shielded RJ45 connectors
(CON-CRIMP-RJ-45/CAT6(STP-23#)). Here is the procedure for terminating these cables.
Tools Needed
1. Razor Knife
2. Wire Cutters
3. Pliers
4. Standard RJ45 Crimp Tool
Procedure
Step 1
Remove approximately 2.5” of the Blue Jacket using the Razor Knife exposing the 4 shielded pairs and
drain wire. Fold the drain wire over onto the cable for future use.
Step 2
Separate the 4 Pairs. Again using the Razor Knife, carefully remove the shielding without scoring the
wires beneath it. Repeat for all 4 pairs.