Duff-Norton SK6415-200 (SPA Series AC) User Manual
Page 11
11
to install terminals on switch terminals tabs with
needle-nose pliers and care should be taken not to
damage terminal tab or switch (see Figure 6-3).
d. Feed terminal wires, (17) red, (18) blue, fuse
jumper wire, and motor lead through 1/2"
tapped hole in cover capacitor box outside of
cover.
e. Moving wires out of the way, insert capacitor (5)
into box (termials up) and attach motor lead wire
(large connectors) to capacitor terminals. (Red on
one pair of capacitor terminals and blue on the other
pair of capacitor terminals.)
f. Insert insulation (4) and assemble gasket (3)
and cover (2) with screws (1).
g. Adjust actuator limit switch settings per
instructions in paragraph 2-2.
h. If actuator has potentiometer, refer to
position indicator installation and calibration
instructions in Paragraph 2-4.
I. Attach gasket (12) and cover (11) with screws (1).
ASSEMBLY IS NOW COMPLETE.
6415-200 manual 10/10/06 11:46 AM Page 11