iRobot Scooba 390 Series - Manual (Page 24)

Remove vacuum port. Rinse under warm water. Replace vacuum port.
www.irobot.com 17
Scooba Maintenance
16 iRobot Scooba Owner's Manual
Scooba Maintenance
Scooba Maintenance
To keep Scooba running at peak performance, perform the following mainte-
nance tasks after every cleaning cycle:
Rinse Scooba's Dirty and Clean tanks
Clean Scooba's filter
CAUTION: Scooba contains electronic components that can be damaged by spills
of water or other liquids. Clean the bottom and top of Scooba with a damp cloth only.
Do not pour or spray water onto Scooba, other than into the Clean or Dirty tanks.
Partially fill the Dirty tank
with water. Empty and rinse both the
Clean and Dirty tanks.
Remove filter. Rinse under warm water. Replace filter.
Push the Eject Brush
button to remove the
cleaning head. Open the cleaning head
and remove the brush. Rinse cleaning head and
brush under warm water.
Clean Scooba's brush
Scooba's brush is located inside a cartridge called the “cleaning head.”
Access to the cleaning head is inside Scooba, so the tank needs to be open
when removing and replacing the cleaning head.
Rinse Scooba's vacuum port regularly
Replace Scooba's
cleaning head.