MSI Wind Board D510 - Manual (Page 17)

En-7
English
P
OWER
S
UPPLY
P
OWER
S
UPPLY
ATX 24-pin Power Connector: JPWR1 ATX 24-pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX
24-pin power supply, make sure the plug of the power supply is inserted in the proper
orientation and the pins are aligned. Then push down the power supply fi rmly into the
connector.
You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin
ATX power supply, please plug your power supply along with pin 1 & pin 13.
13.+3.3
V
1.+3.3V
14.-12V
2.+3.3V
15.Ground
3.Ground
16.PS-ON#
4.+5V
17.Ground
5.Ground
18.Ground
6.+5V
19.Ground
7.Ground
22.+5V
10.+12V
20.Res
8.PWR
O
K
23.+5V
11
.+12V
21.+5V
9.5VSB
24.Ground
12.+3.3V
ATX 4-pin Power Connector: JPWR2 ATX 4-pin Power Connector: JPWR2
This connector is used to provide the power output to the CPU.
4.+12
V
2.Ground
3.+12V
1.Ground
Important Important
Make sure that all the connectors are connected to proper ATX power supplies to
ensure stable operation of the mainboard.
Power supply of 350 watts (and above) is highly recommended for system stability.
•
•