Inserting waypoint, Reversing route, Selecting route report page – Seiwa SW701i SW701e User Manual

Page 33: Sending route, Receiving route, Safe route checking

Advertising
background image

35

User Manual

Inserting Waypoint

To insert a new Waypoint between two existing ones:

Place the cursor on the desired Route leg + [Insert]

1

+ move the cursor to

the new position + [ENTER]

1

NOTE

1

F

OR

SEAWAVE

3

, press [1, Insert] and [1, Accept].

The new Waypoint is placed.

To add a new Waypoint to the last Waypoint of the Route:

Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]

MARLIN:

Place the cursor + [ROUTE]

Reversing Route

To generate a new route reversing an existing one.

If in Route Data Report page:

[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Reverse]

1

NOTE

1

F

OR

SEAWAVE

3

, press [3, Reverse].

SW1101:

[DATA] + "Route" + [ENTER] + "Report" + [ENTER] + [Reverse]

The Route is then followed in reverse order, with Waypoints renumbered accord-

ingly. If the destination is placed on the Route, that Route cannot be reversed.

Selecting Route Report page

To give information on Waypoints belonging to the selected Route:

[MENU] + "Route" + [ENTER] + "Report" + [ENTER]

SW1101:

[DATA] + "Route" + [ENTER] + "Report" + [ENTER]

In this page it is possible to modify the Speed and Fuel consumption values:

[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [Speed]

1

/[Fuel]

1

+

use the cursor to insert values + [ENTER]

NOTE

1

F

OR

SEAWAVE

3

, press [1, Fuel]/[2, Speed].

SW1101:

[DATA] + "Route" + [ENTER] + "Report" + [ENTER] + [Speed]/[Fuel] + use

the cursor to insert values + [ENTER]

Sending Route

To transmit the Active Route information onto the NMEA output port.

[MENU] + "Route" + [ENTER] + "Send" + [ENTER]

SW1101:

[DATA] + "Route" + [ENTER] + "Send" + [ENTER]

The NMEA WPL & RTE messages are sent to the output port.

Receiving Route

To save Route information received from the NMEA input port.

[MENU] + "Route" + [ENTER] + "Receive" + [ENTER]

SW1101:

[DATA] + "Route" + [ENTER] + "Receive" + [ENTER]

The received route is saved on the Active route, overwriting it. The NMEA WPL &

RTE messages are sent to the input port.

Safe Route Checking

This function checks the presence of particular cartographic objects (see the list

Advertising