Cyborg V.7 Keyboard - Manual (Page 5)

5
Installing your Cyborg ® V.7 keyboard
First plug the USB cable marked “K/B” into one of your PC’s free USB ports. If you intend to use headphones, 1.
speakers, headset or microphone, also plug the pink and green mini jackplugs into the corresponding audio in
and out sockets of your PC. Now plug your headset, speaker cables etc into the pink audio in and green audio
out sockets at the rear right side of your keyboard.
The Cyborg
2. ® keyboard’s second USB cable marked “Ext” functions as a USB extension. Plug the cable into one
of your PC’s free USB ports and then plug a USB device directly into the USB port on the rear right side of the
keyboard. The USB device will now communicate directly with your PC.
To change the lighting settings of your Cyborg
3. ® keyboard, first select either Normal mode or Cyborg ® mode by
pressing the Cyborg ® face on the keyboard’s control panel. In Normal mode you can only change the colour
and the brightness of the whole keyboard (Game keys are not lit). To change the colour of the lighting, press the
colour icon and then press “+” or “-” to scroll through the colours. To change the brightness of the lighting, press
the brightness icon and then increase or decrease the brightness by pressing “+” or “-”.
In Cyborg
® mode, you can change the lighting colour and brightness of specific areas of your keyboard. Select
Cyborg ® mode by pressing the Cyborg ® face. Now, select the part of the keyboard for which you want to change
the lighting effects and change the colour by pressing the colour icon on the control panel and then pressing
“+” or “-” to scroll through the colours. To change the brightness of the lighting, press the brightness icon and
then increase or decrease the brightness by pressing “+” or “-”. Each time you want to change the brightness of
a particular area of the keyboard, select the area by pressing the control panel, and then repeating the above
steps to change colour or brightness. The colour settings you choose will remain even after a system reboot or
unplugging the keyboard.
Please note:
The Cyborg
® keyboard’s 12 programmable keys and volume light indicators will not function until you have
installed the keyboard drivers. Please install the Cyborg ® keyboard drivers and Smart Technology software for
complete functionality.
System Compatibility
PC running Windows XP/XP64/Vista/7 (all versions)