Kodak M52 - Manual (Page 22)

22 www.kodak.com/go/support
2
Solve camera problems
Go to www.kodak.com/go/m52support for the Extended user
guide, firmware updates, and answers to your questions.
Status Solution
Camera does not
turn on/off or function ■ Make sure the battery is charged and
installed correctly (
see page 1 ).
LCD is too dark. ■ Adjust the LCD Brightness setting in the
Settings menu (
see page 11 ).
Short battery life ■ Make sure the battery is charged ( see
page 1 ).
■ Limit the time you review pictures/videos
on the camera LCD.
■ Purchase a spare battery at
www.kodak.com/go/accessories .
Flash does not fire ■ The flash does not fire in all modes.
Change modes as needed (
see page 17 ).
Computer does not
communicate with
the camera ■ Turn the camera off, then back on.
■ Make sure the battery is charged and
installed correctly (
see page 1 ).
■ Make sure a KODAK Camera USB Cable,
Micro B / 5-Pin is connected to the
camera and the computer (
see page 15 ).
Then turn on the camera.
■ See KODAK Software Downloads at
www.kodak.com/go/camerasw .
urg_01250.book Page 22 Friday, January 7, 2011 11:22 AM