Lenovo ThinkVision LT1423p 13.3-inch IPS LED Backlit LCD Wireless Touch Monitor with pen - Manual (Page 11)

Setting up your monitor
This section provides information to help you set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety Information located in the Quick Start Guide
before carrying out this procedure.
1. Power on the computer.
2. To install the monitor driver, follow the on-screen instructions.
a. Connect the USB cable to the USB port of the side of the monitor and the other two ends
to the appropriate USB ports on your computer.
b. To install the monitor driver, you can find the driver setup file in the monitor mass storage
USB disk. For detailed Setup steps, please see " Chapter 4".
Remark:
To ensure optimal display performance, connect the monitor to your PC using a USB 3.0 and
a USB 2.0 port at the same time. Using only one USB 2.0 port may decrease the brightness
level of the display.
Chapter 1. Getting started 1-5