Konica Minolta KIP 7100 - Manual (Page 97)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 96 -
Operation Details
Main Screen
The main Copy Color screen is selected with the Copy Button from the main Home Screen, then use the
Color button in the upper left corner to select Color Mode.
The following pages detail the functions and settings of each button and sub screen that can be used
to adjust the color copy mode.
Original
This region allows the setting of the Size Mode (Engineering or Architectural) & the original image type.
Original Size Mode
This button is used to select the Size Mode of Engineering or Architectural.
This will allow the automatic width detection system to determine the image
width when an original is placed in the KIP 3000.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architectural widths = 36, 30, 24, 18, 12, and 9 inches