Konica Minolta KIP 7100 - Manual (Page 82)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 81 -
Edit
Allows the user the ability to edit an existing mailbox
Start
No function at this time in Scan Mode.
All scans in Scan Mode are “Auto Start”.
Reset / Stop
This button has two functions.
1. Press the Stop button on the UI to stop the current scan. The original will be
ejected automatically. If not, open Top Cover to remove the original.
2. Press the Reset button to restore the “default settings” in Scan Mode. Some
of the default settings are determined in the Information / Help Screen of the
UI. (see Scan Mode Configurations chapter)
Re-Scan
If the scanned image was not satisfactory, you can replace the last image scan by
selecting this button and proceeding with the scan procedure as normal.
View Last
Allows the last scan to be reviewed again on the UI.
Log Off
This button may be displayed if KIP Track is enabled. Press this button to log off the
current user after scanning has been completed.