Konica Minolta bizhub 4750 - Manual (Page 16)

[Copy Functions] 3-2
3
3 Saving the Number of Print Sheets
Copying on both sides of paper ([Duplex])
Copy the 1-sided original on both sides of paper, or copy the 2-sided original on both sides or on a single
side of sheets of paper.
By using both sides of paper for copying, you can reduce paper consumption by half. You can further reduce
the amount of paper used by using the Combine function.
This section describes the operation flow in the case where a 1-sided original of multiple pages is copied onto
both sides of sheets of paper.
1
Load the original.
2
Tap [Duplex/Combine].
3
In [Duplex], tap [1-Sided > 2-Sided].
% For 2-sided original, select [2-Sided > 1-Sided] or [2-Sided > 2-Sided]. Select an arbitrary key ac-
cording to the original condition and copy result.
4
In [Binding Position], specify [Original] and [Output].
% For 1-sided originals, select the copy binding position in [Output]. If [Auto] is selected, the copy
binding position is automatically determined to fit the length of the long side of the paper.
% For 2-sided originals, select the original and copy binding positions in [Original] and [Output]. If [Au-
to] is selected, the copy binding position is automatically determined to fit the length of the long
sides of the original and the paper respectively.
5
Tap [Original Direction], then select the original loading direction.
6
Tap [OK].
7
Press the Start key.
The original is scanned, and copying starts.