Konica Minolta bizhub C550 - Manual (Page 38)

Installing the printer driver 2
C550 2-3
Automatic installation using the installer
With the installer, this machine is detected to determine whether it is con-
nected by USB or is on the same TCP/IP network as the computer, and then
the required printer is automatically installed. You can also manually specify
the printer driver to be installed.
2
Note
Since this machine is automatically detected with a network connection,
be sure to set the IP address for this machine before connecting it. For
the setting procedure, refer to “Setting the IP address for this machine”
on the User’s Guide [Print Operations].
When installing on Windows NT 4.0, 2000, XP, or Server 2003, adminis-
trator permissions are required.
If the wizard starts up in order to add new hardware with a USB connec-
tion, click [Cancel].
Installer operating environment
* With Windows NT 4.0, in order to install a machine that is connected directly to a network using
the TCP/IP protocol, Microsoft TCP/IP Printing Services must first be installed on the computer
being used.
Operating system Windows NT 4.0 (Service Pack 6a or later)*, Windows 2000 Professional
(Service Pack 4 or later), Windows XP Home Edition/Professional (Service
Pack 2 or later), Windows Server 2003 x64 edition, Windows Server 2003
or Windows XP Professional x64 edition
Processor Pentium 300 MHz or higher recommended
Memory 64 MB or more (128 MB or more recommended)