Konica Minolta MAGICOLOR 2300 - Manual (Page 121)

Repacking the Printer 113
B. Remove the Media and the Tray 1 Media Support
1
Remove the media.
Place it in its original packaging and store in a cool, dark place on a level
surface. Avoid moisture, excess humidity, direct sunlight, excess heat
(above 95°F/35°C), and dust.
2
Lift the media support from the three
holes in Tray 1 and remove the
media support.
C. Remove the Options (if Attached)
Duplex Option
If you don’t have a duplex option installed, skip to the next section.
1
Pull the right-side door release
lever, and open the right-side door.
2
Unhook the support wire.
3
Close the right-side door.