Konica Minolta bizhub 360 User Manual
Page 173
4
Application Software
4-18
360
Application Software
Chapter 4
7
Enter the User Box Password.
?
What precautions should be used when entering the User Box
Password in each of the different password boxes?
%
In the “Current password” box, enter the currently set User Box
Password.
%
If Public is to be set for User Box Type, a password that meets the
requirements of the Password Rules must be entered in the “New
Password” box. For details of the Password Rules, see “Password
Rules” on page 1-11.
%
In the “Confirm new password” box, enter the same User Box
Password as that entered in the “New password” box.
8
Click the [OK].
?
What steps should be performed to change the owner of the User
Box?
%
When the owner of the User Box is to be changed, enter the User
Name registered in the machine as an authorized user of the ma-
chine in the Owner Name.
2
Note
If there is a mismatch in the Current Password, a message appears that
warns that there is a mismatch in the User Box Password. Click [OK] and
perform steps 7 and 8 again.
If the User Box Password entered does not meet the requirements of the
Password Rules with “Public” selected for User Box Type, a message ap-
pears that tells that the User Box Password entered cannot be used.
Click [OK] and perform steps 7 and 8 again. For details of the Password
Rules, see “Password Rules” on page 1-11.
360_security_E.book 18 ページ ２００７年３月７日 水曜日 午後２時５０分