1 changing the encryption key – Konica Minolta bizhub 420 User Manual
Page 11
3.1 Changing the Encryption Key
<Setting can be made only from the MFP main control panel>
1
Enter the Administrator Mode on the MFP display, Utility/Counter button > Administrator Settings >
Input Admin Password >Security Setting > HDD Settings > HDD Encryption Setting.
2
Enter the currently registered 20-digit Encryption Key from the keypad.
ter 2
3
Touch [Edit].
?
What if there is a mismatch in the Encryption Keys?
If there is a mismatch in the Encryption Keys, a message appears stating that there is a mismatch
in the Encryption Keys. Enter the correct Encryption Key once again.
4
Enter the new 20-digit Encryption Key from the keypad.
5
Touch [OK].
6
To prevent entry of a wrong Encryption Key, enter the 20-digit Encryption Key once again.
7
Touch [OK].