Konica Minolta BIZHUB 223 - Manual (Page 220)

bizhub 423/363/283/223 10-14
10.1 Using an authentication unit (biometric type) 10
8
Register finger vein patterns.
% Scan a finger vein pattern three times; reset the same finger and then press [Start Reading] for each
scanning.
% After scanning the finger vein patterns, place the same finger, and click [Authentication Test].
% If the authentication test has succeeded, press [Register].
% If the authentication test has failed, place your finger on the authentication unit again, and click [Au-
thentication Test].
% If the authentication has failed, click [Reset] to repeat the scanning process.
9
Click [Registration].
10
Click [OK].
% Repeat steps 5 to 10 to register all users.