Machine controls – Nilfisk-ALTO 91WS User Manual

Page 14

Advertising
background image

American-Lincoln

1 - 13

91 WS

CIRCUIT BREAKERS
The circuit breakers provide protection for the electrical
system and are located on the console. The circuit breaker
“POPS” out when an overcurrent condition exists.

When a circuit breaker pops out, the machine must be
taken out of service and repaired before the circuit breaker
will reset. The circuit breaker may be reset when the
overcurrent condition has been corrected.

Push the button in to reset a popped circuit breaker.

REWIND STARTER
The Gas/LP engine is equipped with a rewind starter. If the
battery is dead, it may be possible to start the engine with
the rewind starter.

Open the top cover to gain access to the rewind starter.

To use the rewind starter:

-Turn key switch to “On” position.

-Grasp the starter, and pull it slowly until the starter en-
gages.

-Pull the cord rapidly enough to overcome compression,
prevent kickback and start engine.

CHOKE

START

CB-1 CB-2

FILTER SHAKER

OFF

OFF

ON

BATTERY

10

12

14

16

0 0 0 0

0

HOURS

CIRCUIT

BREAKERS

C-1161

P4550

FIGURE 12

C1161

FIGURE 11

MACHINE CONTROLS

Advertising