AEG L61271WDBI - Manual (Page 14)

The detergent compartment for the prewash phase, the soak
programme and for the stain function.
Add the detergent for prewash, soak and stain remover before
the start of the programme.
The detergent compartment for the washing phase.
If you use a liquid detergent, put it immediately before you start
the programme.
Liquid additives compartment (fabric conditioner, starch).
Put the product in the compartment before you start the pro-
gramme.
This is the maximum level for the quantity of liquid additives.
Always obey the instructions that you find on the packaging of the de-
tergent products.
9.3 Setting the programme
(knob 1 )
Turn the programme selector dial to the
required programme.
The programme dial determines the
type of washing cycle (e.g. water level,
drum movement, number of rinses) and
the washing temperature according to
the type of laundry.
The pilot light of button 8 starts blinking.
The programme dial can be turned ei-
ther clockwise or anticlockwise.
= Reset programme / switching OFF
of the machine
If you turn the programme dial to
another programme when the
appliance is working, the yellow
pilot light of button 8 blinks 3
times. The display shows the
message Err to indicate a wrong
selection. The machine will not
perform the new set programme.
9.4 Setting the SPIN speed
(button 3)
When you set the programme, the appli-
ance automatically proposes the maxi-
mum spin speed allowed by that pro-
gramme.
Press this button repeatedly to change
the spin speed. The relevant light will
light up.
RINSE HOLD : the water of the last rinse
is not emptied out to prevent the fabrics
from creasing. When the programme
has finished the display shows a blinking
.
The DOOR pilot light goes on.
The pilot light of button 8 is off. The
door is blocked to indicate that the wa-
ter must be emptied out.
To empty the water out please read
chapter «At the end of the pro-
gramme».
9.5 Setting the
TEMPERATURE (button 2)
When setting a programme, the
appliance automatically propo-
ses the default temperature pro-
vided for that programme.
Press the button 2 repeatedly to in-
crease or decrease the temperature, if
you want your laundry to be washed at a
different temperature.
The wash with cold water is indicated
with
.
For the maximum and the mini-
mum available wash water tem-
perature, see «Washing pro-
grammes».
9.6 Setting the STAIN option
(button 4)
Set this option to treat heavily soiled or
stained laundry with stain remover
The appliance extends the main wash
phase and intensifies the stain action
phase. The relevant light illuminates.
14 www.aeg.com