AEG L75270FL - Manual (Page 22)

5. When no more water comes out, un-
screw the pump cover (A) by turning
it anti-clockwise and remove the fil-
ter. Use pliers, if necessary.
Always keep a rag nearby to dry up
any water spillages when removing
the cover. Clean the filter under a
tap, to remove any traces of fluff.
6. Remove foreign bodies and fluff from
the filter seat and from the pump im-
peller.
7. Check carefully whether the pump
impeller rotates (it rotates jerkily). If it
doesn’t rotate, please contact your
Service Centre.
8. Put the cap back on the emergency
emptying hose and place the latter
back in its seat.
9. Replace the filter into the pump by
inserting it correctly into the special
guides. Screw the pump cover firmly
by turning it clockwise.
WARNING!
When the appliance is in use and depend-
ing on the programme selected there can
be hot water in the pump.
Never remove the pump cover during a
wash cycle, always wait until the appliance
has finished the cycle, and is empty.
When refitting the pump cover, ensure it
is securely re-tightened so as to stop
leaks and young children being able to re-
move it.
THE INLET HOSE FILTER AND
THE VALVE FILTER
It could be necessary to clean the filters
when:
• The appliance does not fill with water.
• The appliance fills with the water for a
long time.
• The indicator of button 8 flashes and
the display shows the related alarm. Re-
fer to 'Troubleshooting'.
WARNING!
Disconnect the mains plug from
the mains socket.
22 www.aeg.com