Bush Hog RMB 1660 - Manual (Page 43)

ASSEMBLY
RMB 1660 11/10 Assembly Section 3-5
© 2010 Alamo Group Inc.
ASSEMBL
Y
ATTACHMENT TO TRACTOR
• Reverse tractor squarely up to the machine.
• Connect the tractors sway bars - selecting the
rear most hole in the machines lower link
brackets that allow the machine to be mounted
without contacting the tractor.
• Ensure that the same hole is used on both
sides.
• If necessary fit the spacers supplied (as
required) to minimise sideways movement of
the tractor sway bars within the hitch brackets.
• Tighten tractor’s stabilizers.
• The lifting equipment may now be removed.
• Fit the stabilizer tongue (A or B) into the tractors
top link position. Use the highest position
available avoiding any load sensing properties.
• The bolt-on tongue of the stabilizer is reversible
to accommodate a variety of tractor linkage
designs.
• Stretch out the stabilizer and rest the bottom
legs on the lower rail.
• Do not fit stabilizer lower pins at this stage.