Pioneer AVH-5200DVD - Manual (Page 49)

— On-screen display
— Multi language setting for DivX
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
! To complete this operation, switch the igni-
tion key off and on after you set this set-
ting.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
English (English)
—Español (Spanish)—
Português (Portuguese)
—Русский (Russian)
Clearing Bluetooth memory
(AVH-5200BT only)
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1 Turn the unit off.
Refer to Basic Operations on page 10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 39.
3 Touch Bluetooth Clear Memory on the
system menu.
4 Touch Reset.
After selecting a desired item, a confirmation
display appears. Touch
Reset to delete the
memory.
# If you do not want to clear the selected mem-
ory, touch
Cancel.
Updating Bluetooth connection
software
(AVH-5200BT only)
This function is used to update this unit with
the latest software. For information on the soft-
ware and updating, refer to our website.
Important
Never turn the unit off and never disconnect the
phone while the software is being updated.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Bluetooth Software Update.
3 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the software.
Displaying the Bluetooth
system version
(AVH-5200BT only)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic Operations on page 10.
2 Display the system menu.
Refer to Introduction of menu operations on
page 39.
3 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Adjusting the LCD panel slide
position
You can adjust the LCD panel slide position so
that the panel is set back or forward.
1 Display the system menu.
Refer to Introduction of menu operations on
page 39.
2 Touch Flap Set Back.
En
49
Section
11
Menu
operations
Menu operations