Pioneer DEH-P9300R - Manual (Page 35)

34
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Recalling broadcast stations
1. Press NEXT to display “1” – “6” (or “7” –
“12”.
Press NEXT until “1” – “6” (or “7” – “12”)
appears.
2. Press any of the buttons 1 – 6 (or 7 – 12)
to recall the station preset under that but-
ton.
Note:
• You can also use
5 or ∞ to recall broadcast sta-
tions memorized under the buttons 1 – 12.
C
hanging a band
• Press BAND to select the desired band.
Press BAND repeatedly to switch between
the following bands:
TV 1
=
TV 2
T
V tuner function menu
The TV tuner function menu has the following
functions:
q BSSM (best stations sequential memory)
Press BSSM repeatedly to turn BSSM on or
off.
When finished, the display switches to the
preset channel list mode.
w chLIST (preset channel list)
For operation of the preset channel list, refer
to “Selecting channels from the preset chan-
nel list” on this page.
Note:
• If you do not operate the function within about 30
seconds, the display is automatically returned.
S
electing channels from the pre-
set channel list
The preset channel list lets you see the list of
preset channels and select one of them to
receive.
1. Press FUNC and then press chLIST to
select the preset channel list mode.
2. Press NEXT to switch between “1” – “6”
and “7” – “12”.
3. Press any of the buttons 1 – 6 (7 – 12) to
recall the desired channel.
Note:
• You can also use
2, 3 and 5 to select and recall
the desired channel.
q w