Pioneer SC-LX82 - Manual (Page 58)

Listening to your system 06
58
En
Chapter 6:
Listening to your system
Important
• The procedure for setting the receiver operation
mode differs for the remote controls included with
the SC-LX82 and SC-LX72. For the SC-LX82’s remote
control, set the remote control operation selector
switch to
RECEIVER. For the SC-LX72’s remote
control, press the button. When “set the
remote control to the receiver operation mode” is
indicated in these instructions, use the respective
procedure described above.
• The listening modes and many features described in
this section may not be available depending on the
current source, settings and status of the receiver.
Auto playback
There are many ways to listen back to sources using this
receiver, but for the simplest, most direct listening option
is the Auto Surround feature. The receiver automatically
detects what kind of source you’re playing and selects
multichannel or stereo playback as necessary.
1
SC-LX82:
SC-LX72:
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press AUTO/ALC/
DIRECT (AUTO SURR/ALC/STREAM DIRECT)
2
for auto
playback of a source.
AUTO SURROUND shows briefly in the display before
showing the decoding or playback format. Check the
digital format indicators in the front panel display to see
how the source is being processed.
3
• If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will
automatically be selected and shows in the display.
• When listening to the FM Radio or the Neural THX
feature is selected automatically (see Using Neural
THX on page 55 for more on this).
ALC – In the Auto level control (ALC) mode, this receiver
equalizes playback sound levels.
OPTIMUM SURR – In the Optimum Surround mode, this
receiver automatically optimizes sound balance in each
scene based on actually set volume. The sound balancer
controls three major theater sound elements dialogue,
bass and surround with original algorithm.
Tip
• When an ALC is selected, the effect level can be
adjusted using the EFFECT parameter in Setting the
Audio options on page 85.
Note
1 • Stereo surround (matrix) formats are decoded accordingly using Neo:6 CINEMA or 2 Pro Logic IIx MOVIE (see Listening in surround
sound on page 59 for more on these decoding formats).
• The Auto Surround feature is canceled if you connect headphones.
RECEIVER
SOURCE
TV RECEIVER
VOL
VOL
TVCONTROL
CH
RECEIVER
iPod CTRL
STATUS
THX PQLS MPX
PHASE CTRL CH LEVEL
TUNE
PGM MENU
STEREO
SIGNAL SEL SLEEP AUDIO
INFO
DIMMER
A.ATT SBch MCACC
D SP
AUTO/ALC/
DIRECT STANDARD ADV SURR
PGM
AUTO/ALC/
DIRECT
AUTO/ALC/
DIRECT
PHASE CTRL STATUS
REMOTE
SETUP
HDD PGM DVD
STANDARD STEREO
MENU
ADV SURR
THX
AUDIO
MULTI OPE
INFO
DISP
MPX PQLS
CH
RECEIVER TV CTRL
TV/DTV
AUTO/ALC/
DIRECT
HDD
RECEIVER
2 • For more options using this button, see Using Stream Direct on page 62.
• The AUTO SURROUND mode cannot be selected in the following cases:
– When headphones are plugged in (except
ALC).
– When MULTI CH IN input is selected.
– When the HDMI audio output parameter is set to THROUGH in Setting the Audio options on page 85.
3 Neural THX is selected when Neural Radio is accessed with the HOME MEDIA GALLERY input. However, Stereo is selected when a category
other than Neural Radio is accessed.
SC-LX82_LX72.book Page 58 Thursday, April 23, 2009 7:05 PM