Pioneer DEH-P9600MP - Manual (Page 61)

ceived using a cellular telephone connected to
this unit.
! When the hands-free telephoning is
Hands free OFF, you can operate this func-
tion.
! The sound is turned off, MUTE or ATT is
displayed and no audio adjustment is pos-
sible.
! Operation returns to normal when the
phone connection is ended.
1 Press FUNCTION to select Mute.
Press FUNCTION repeatedly until Mute ap-
pears in the display.
2 Press c or d to select the desired set-
ting.
Each press of c or d selects settings in the
following order:
TEL mute (muting) 10dB ATT (attenuation)
 20dB ATT (attenuation)
20dB ATT has a stronger effect than
10dB ATT.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1 Press FUNCTION to select
FM tuning step.
Press FUNCTION repeatedly until
FM tuning step appears in the display.
2 Press c or d to select the FM tuning
step.
Pressing c or d will switch the FM tuning
step between 50 kHz and 100 kHz while AF or
TA is on. The selected FM tuning step will ap-
pear in the display.
Note
The tuning step remains at 50 kHz during manual
tuning.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1 Press FUNCTION to select Auto PI seek.
Press FUNCTION repeatedly until
Auto PI seek appears in the display.
2 Press a or b to turn Auto PI seek on or
off.
Pressing a or b will turn Auto PI seek on or
off and that status will be displayed (e.g.,
Auto PI seek ON).
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1 Press FUNCTION to select
Warning tone.
Press FUNCTION repeatedly until
Warning tone appears in the display.
2 Press a or b to turn Warning tone on
or off.
Pressing a or b will turn Warning tone on or
off and that status will be displayed (e.g.,
Warning tone ON).
Initial Settings
En
61
English
Section
10