Pioneer AVIC-F320BT User Manual
Searching for your destination by address, Basic hardware buttons, Switching the screen
Searching for your destination
by address
1
Display “
Navigation
Menu
” screen and touch
Ad dress
.
2
Input the information that
you want to set as the des-
tination.
Touch one of the options.
After narrowing down your desti-
nation, the Location confirma-
tion screen will appear.
3
Touch
OK
.
After searching for the destina-
tion, the Route confirmation
screen appears.
4
Touch
OK
.
The navigation system gives you
route guidance both visually and
by voice.
Quick Start Guide
This guide is intended to guide you through the basic functions of this navi-
gation system. For details, please refer to Operation Manual.
Published by Pioneer Corporation.
Copyright © 2010 by Pioneer Corporation.
All rights reserved.
Printed in China
<KYTNX> <10B00000>
<CRB3290-A/S> EU
GPS NAVIGATION AUDIO SYSTEM
Basic Hardware buttons
1
MODE button
Press to switch between the
map screen and the audio oper-
ation screen.
2
MULTI-CONTROL
Rotate to adjust the audio vol-
ume.
Press left or right to select the pre-
vious or next song, files, etc. when
the audio source is selected.
3
LIST button
Press to display a list of songs
or folders, when an iPod or
other audio source is selected.
4
SRC/OFF button
Press to select the audio
source.
5
BAND/ESC button
Press to change the band for
the radio.
6
button
Press to remove the detachable
device from the head unit.
3
2
1
4
6
Switching the screen
Shortcut Menu
Audio operation screen
Applications Menu*
Navigation Menu
Phone Menu
Map screen
Top Menu
(Classic menu)
AVIC-F320BT
*
You can launch applications downloaded to an SD memory card via the
utility programme navgate FEEDS.
For details, please refer to Operation Manual.
5
Navigation Menu
Touch
Home
on the map screen and touch
Navigation
on the
“
Top Menu
” screen.
4
1
5
6
7
2
3
8
9
a
c
b
1
Searches for a location by
address
2
Calculates the route home
3
Searches for a place from
stores, restaurants, and
other businesses in the
points of interest database
4
Searches for POIs by using
the data on external storage
devices (SD)
5
Selects the stored location
6
Selects a previously routed
destination
7
Cancels your current route
8
Sets the accurate location
from a latitude and longitude
9
Estimates the fuel cost
a
Displays a graph for eco-driv-
ing
b
Displays the traffic informa-
tion
c
Displays the current route
information