Toshiba Magnia Z500 - Manual (Page 89)

HW Diagnostics
Items of HW Diagnostics
87
CACHE MEMORY TEST (CAH) Error log
[09. SCSI TEST]
To test the SCSI devices.
Before running the test, you must set the parameters. If "HOST ID
NUMBER" is set as "ALL", "SCSI ID NUMBER" and
"CHANNEL NUMBER" are ignored. (Even if the SCSI device
does not exist on your computer, this test can be executed,
however nothing is tested.)
[01. INQUIRY]
This subtest issues the INQUIRY command to the SCSI bus
and displays result messages returned from the devices on the
SCSI bus. After specifying the valid host and channel number,
the INQUIRY command is sent to the target SCSI bus. It then
displays the result code from ID0 through ID15.
CHAN
Indicates the ASPI Channel ID and host adapter.
HOST
The channel number in the target host adapter.
ID00, 01, 02 …
The SCSI ID number in the target host adapter.
Status Error name Meaning
01 MEMORY PARITY ERROR Memory parity error
02 PROTECT MODE ERROR The shift to the protected mode failed
03 CACHING ERROR An error occurred on the cache system
FF DATA COMPARE ERROR Data comparing error