Toshiba Qosmio G20 (PQG20) - Manual (Page 72)

3-12 User’s Manual
Getting Started
Restoring QosmioPlayer
To restore QosmioPlayer, follow the steps below.
1. Load the QosmioPlayer Recovery CD in the optical media drive and
turn off the computer’s power.
2. Hold down the F12 key and turn on the power. When
Qosmio
appears,
release the F12 key.
3. Use the left or right cursor key to select the optical media drive in the
Boot Devices
menu. For details, refer to the Boot Priority section in
Chapter 7, HW Setup.
4. Follow the on-screen instructions.
Your computer may be configured with either one or two hard disk drives.
When you have two hard disks installed, data will be recovered onto
built-in HDD1 regardless of the HDD Priority settting.