Toshiba Magnia Z500 - Manual (Page 46)

3.2.2.1 [Basic Setting] page
Make basic settings of the MAGNIA Software Access Point.
‹ [Basic Setting] page
Item Explanation
[Access Point Name]
edit box
Specifies the name to identify the access point.
Specify the name with up to 32 ASCII characters.
The default is MAGNIA Software AP.
[Network Name (ESSID)]
edit box
Specifies the name of the logical network configured by the
access point. The same setting item is provided on the station
that runs in infrastructure mode. The same name as the
access point to be connected to must be specified in the setting
item.
Specify the name with up to 32 ASCII characters.
The default is MAGNIA. If it is still default, a third person may
connect to the access point carelessly. Please change it.
See the following section too.

[Appendix 2 Security]