Sharp AY-XP9LSR - AE-X9LSR - Manual (Page 11)

GB-9
ENGLISH
TIMER ON
1
Press the TIMER ON button and
set the time as desired.
• The orange TIMER lamp ( ) will light
up.
• The time setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp ( ) will turn
off.
TIMER OPERATION
1
TIMER OFF
1
Press the TIMER OFF button
and set the time as desired.
• The orange TIMER lamp ( ) will light
up.
• The time setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp ( ) will turn
off.
0.5h 1.0h 1.5h 10h 11h 12h 0.5h 1.0h 1.5h 10h 11h 12h
CANCEL
1
NOTE:
• Timer duration can be set from a minimum half an hour to a maximum of 12 hours. Up to 9.5 hours,
you can set in half-hour increments, and from 10 to 12 hours, in 1-hour increments.
• The TIMER OFF and TIMER ON can not be set together.
• The 1-HOUR OFF TIMER has priority over TIMER ON and TIMER OFF.
• When the temperature is set during timer setting, the temperature will show in the display for 5 sec-
onds and then return to the timer display.
TIMER OFF
• When the TIMER OFF is set, the temperature setting is automatically adjusted to prevent the room
from be coming excessively cold or warm , for example while you sleep. (Auto Sleep function)
COOL mode: One hour after the timer is set, the temperature setting rises by 1 °C.
HEAT mode: One hour after the timer is set, the temperature setting drops by 3 °C.
TIMER ON
• The unit will turn on prior to the set time to allow the room to reach the desired temperature. (Awaking
function)
CANCEL