Sharp KC-860E - Manual (Page 8)

E-6
Date Label
Unplug the unit before installing
or adjusting the fi lters.
PREPARATION FOR USE
1 Remove the Back Panel.
Gently push down on the tabs,
then tilt and remove the back
panel.
Install the fi lters
1 Install the HEPA Filter.
Please make sure that the HEPA Filter is
placed in proper orientation.
To maintain the quality of the fi lters, they are packed in plastic bags and placed in the
unit. Be sure to remove the fi lters from the plastic bags and replace the fi lters in the
unit before initial use.
Remove the fi lters
Back Panel
HEPA Filter
Washable
Deodorizing
Filter
HEPA Filter
FILTER INSTALLATION
1 2
Tabs on the top
Washable Deodorizing Filter
Back Panel
Bottom tabs
Upper tabs
Installing the filter backwards
will affect the performance of
the unit.
Tab
2 R e m o v e t h e W a s h -
able Deodorizing Filter
(black) and HEPA Filter
(white) from the plastic
bags.
2
Insert the Back Panel’s 2 bottom tabs
(left and right) into the small holes in the
unit, and slide the Washable Deodor-
izing Filter between the HEPA Filter and
the Back Panel.
3
Gently push in the up-
per tabs (left and right)
to lock in place.
4 Fill in the usage start
date on the Date Label.
Use the usage start date as
a guide for when the fi lters
should be replaced.
KC-840E_Eng2.indd Sec1:6 2009/09/24 12:23:00