Neff B15E52N3GB - Manual (Page 10)

10
Notes
■
Between the times ƒƒ : ‹‹ and † : †Š the clock display is
dimmed if you do not make any settings in that period or no
clock function is activated.
■
When you set a clock function, the time interval increases
when you set higher values (e.g. cooking time up to ‚ : ‹‹œ to
the minute, using ‚ : ‹‹œ
to the nearest 5 minutes).
■
For the Q minute minder, x cooking time, y end of
operation and preselection mode clock functions, a signal
sounds when the settings have elapsed and the Q or y
symbol flashes. To cancel the audible signal before it ends,
press the KJ clock function button.
■
Briefly press the KJ clock function button to select a clock
function. You then have 3 seconds to set the selected clock
function. After this time, the setting mode is exited
automatically.
Switching the clock display on and off
1. Press and hold the KJ clock function button for 6 seconds.
The clock display switches off. If a clock function is active,
the associated symbol remains lit.
2. Press the KJ clock function button briefly.
The clock display switches on.
Timer
1. Press the KJ clock function button repeatedly until the KJ
and Q symbols light up.
2. Set the duration using the rotary selector (e.g. † : ‹‹ minutes).
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
1. Set the operating mode and temperature.
The appliance heats up.
2. Press the KJ clock function button repeatedly until
the KJ and x symbols light up.
3. Set the cooking time with the rotary selector
(e.g. ‚ : „‹ hours).
The setting is applied automatically. The time is then
displayed again and the set cooking time counts down.
Once the cooking time has elapsed, the appliance switches off
automatically.
1. Turn the operating mode and temperature selector back to
the Û position.
2. Press the KJ clock function button to exit the clock function.
End of operation
Automatic switch-off at a set time.
1. Set the operating mode and temperature.
The appliance heats up.
2. Press the KJ clock function button repeatedly until the KJ
and y symbols light up.
3. Set the end of operation using the rotary selector
(e.g. ‚ƒ : „‹ o'clock).
The setting is applied automatically. The clock is then
displayed again.
The appliance switches off automatically at the time set for the
end of operation.
1. Turn the operating mode and temperature selector back to
the Û position.
2. Press the KJ clock function button to exit the clock function.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1. Set the operating mode and temperature.
The appliance heats up.
2. Press the KJ clock function button repeatedly until
the KJ and x symbols light up.
Preset operation The appliance switches on and off automatically. Cooking time and end of operation
have been combined.
3 Clock Setting the clock
f Rapid heat up Shortens the heat up time
Clock function Use